???? Professional Knowledge
SprayMax 2K Technologie
Everything about the revolutionary 2-component spray can – Workshop quality from a can
????️ Anleitungen & Tipps
???? What is 2K Technology?
2K technology (2-component) is a revolutionary painting technique that was previously only available to professionals with expensive spray guns. SprayMax was the first to make this technology available in a spray can.
In the bottom of the can there is a separate capsule with hardener. Before use, this is activated by pressing – paint and hardener mix and react chemically with each other.
???? Pro Tip
After activation you have 48 hours to use the can. After that, the contents will harden – even in the closed can!
???? The Perfect Paint Build in 4 Steps
Preparation
Sand surface (P320-P600), degrease and mask cleanly
Primer
Apply filler in 2-3 thin coats, observe flash-off time
Base Coat
Paint in cross-passes, 5-10 min flash-off between coats
2K Clear Coat
Protective layer for high gloss and lasting results
⚡ Why 2K Instead of Normal Clear Coat?
Conventional 1K clear coat only dries physically – the solvent evaporates. With 2K paint, an additional chemical reaction takes place, resulting in a much harder and more resistant surface.
❌ 1K Paint (Normal)
- Not fuel resistant
- Yellows over time
- Soft surface
- Prone to scratches
✅ 2K Paint (SprayMax)
- 100% fuel resistant
- UV stable, no yellowing
- Workshop hardness
- Kratz- & chemikalienbeständig
???? Application Tips from the Pro
Watch the Temperature
Paint at 15-25°C. Too cold = slow drying. Too warm = orange peel.
Thin Coats
Better 3-4 thin coats than one thick. Prevents runs and drips.
Observe Flash-off Time
Wait 5-10 minutes between coats. Patience pays off!
Downloads
The most important guides as PDF
???? Ready for Pro Results?
Discover our range of SprayMax 2K products and start your next painting project.
All SprayMax Products →